CS1060 reaction torque sensor CS1060 _en_revb www.meas-spec.com 2012-11-30 1/4 ? square male coupling ? range from 5 to 7,000 nm (4 to 5,600 lbf. ft) ? stainless steel ? cable gland or connector output ? built in amplifier per request description the CS1060 has been designed to measure reaction torque. its sensing element is based on thin layer strain gauges in a wheatstone bridge configuration pr oviding excellent temperature stability. optionally the torque sensor can receive an on-board amplifier for hi gh-level output. intermediate ranges are available at no extra cost. with many years of experience as a designer and manufacturer of se nsors, measurement specialties, inc. often works with customers to design or customize sensors for specific uses and testing environments. to meet your needs we also offer complete turnkey systems. the matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use. features applications ? suited for static applications ? non-rotating parts torque measurement ? square male coupling ? test and measurement ? high level output model with integrated amplifier ? robotics and effectors ? laboratory and research standard ranges f.s. ranges in nm 5 to 100 101 to 300 301 to 800 801 to 3k 3001 to 7k f.s. ranges in lbf.ft 40 to 80 81 to 240 241 to 640 641 to 2.4k 2401 to 5.6k stiffness in nm/rad 2x10 2 to 1x10 4 1x10 4 to 4x10 4 4x10 4 to 1.2x10 5 1.2x10 5 to 6x10 5 6x10 5 to 1.8x10 6 stiffness in lbf.ft/rad 1.4x10 1 to 6.9x10 2 6.9x10 2 to 2.7x10 3 2.7x10 3 to 8.2x10 3 8.2x10 3 to 4.1x10 4 4.1x10 4 to 1.2x10 5 free datasheet http://www.datasheet-pdf.com/
CS1060 reaction torque sensor CS1060 _en_revb www.meas-spec.com 2012-11-30 2/4 performance specifications all values are typical at temperature 201oc parameters operating temperature range (otr) -20 to 80o c (-4 to 176 f) compensated temperature range (ctr) 0 to 60o c (32 to 140 f) zero shift in ctr <0.5% f.s./ 50o c [/100 f] sensitivity shift in ctr <1% of reading / 50 c [/100 f] range (f.s.) 5 nm to 7 knm [4 lbf.ft to 5.6 klbf.ft] over-range without damage 1.5 x f.s. accuracy combined non-linearity & hysteresis 0.25%f.s. electrical characteristics model CS1060 CS1060-a1 CS1060-a2 supply voltage 10vdc 10 ? 30vdc 15vdc (12 to 18vdc) f.s. output 4 2mv/v 2v 5% 5v 5% zero offset 4 <5% f.s. 2.5v 5% f.s. 0v 5% f.s. input impedance/consumption 350 to 700 ? <50ma <30ma output impedance 350 to 700 ? 1 k ? 5 1 k ? 5 insulation under 50vdc 100m ? 100m ? 100m ? notes 1. electrical termination: connector output including mate 2. material: body in stainless steel and housing in aluminum alloy 3. connection : square male couplings standard, other connection types on request (smooth shaft, cotter pin, etc) 4. other signal output on request 5. output impedance < 100 ? on request 6. ce conformance according to en 61010-1, en 50081-1, en 50082-1 free datasheet http://www.datasheet-pdf.com/
CS1060 reaction torque sensor CS1060 _en_revb www.meas-spec.com 2012-11-30 3/4 wiring schematic dimensions in mm [inch] dimensions & wiring schematic (in metric and imperial) f.s. in nm [lbf.ft] 5 to 100 [4 to 80] 101 to 300 [81 to 240] 301 to 800 [241 to 640] 801 to 3000 [641 to 2400] 3001 to 7000 [2401 to 5600] a 35 [1.38] 40 [1.57] 50 [1.97] 65 [2.56] 85 [3.35] b 35 [1.38] 40 [1.57] 45 [1.77] 55 [2.17] 60 [2.36] c 12.7 [1/2?] 19 [3/4?] 25.4 [1?] 38.1 [1?1/2] 50.8 [2?] d 59 [2.32] 80 [3.15] 95 [3.74] 135 [5.31] 160 [6.30] free datasheet http://www.datasheet-pdf.com/
CS1060 reaction torque sensor CS1060 _en_revb www.meas-spec.com 2012-11-30 4/4 options a1 : amplified tension output with unipolar power supply a2 : amplified tension output with bipolar power supply et1 : ctr -20 to 100 c [-4 to 212 f] otr=ctr pe : cable gland termination with 2 m [6.6 ft] cable ordering info CS1060 - a1 - 300nm -/et1 options (l00m,...) range in newton a mplified version (none, a1 o r a 2) model north america europe asia measurement specialties, inc. vibration design center 32 journey - suite 150 aliso viejo, ca 92656 united states usa tel: 1-949-716-0877 fax: 1-949-916-5677 t&m@meas-spec.com measurement specialties (europe), ltd. 26 rue des dames 78340 les clayes-sous-bois, france tel: +33 (0) 130 79 33 00 fax: +33 (0) 134 81 03 59 cs.lcsb@meas-spec.com measurement specialties (china), ltd. no. 26 langshan road shenzhen high-tech park (north) nanshan district, shenzhen 518057 china tel: +86 755 3330 5088 fax: +86 755 3330 5099 pfg.cs.asia@meas-spec.com the information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. furthermore, this informati on does not convey to the purchaser of such devices any license under the patent right s to the manufacturer. measurement specialties, inc. reserves the right to make changes without further notice to any product herein. measurement specialties, inc. makes no wa rranty, representation or guarantee regarding the suitability of its product for any p articular purpose, nor does measurement specialties, inc. assume any lia bility arising out of the application or use of any product or ci rcuit and specifically disclaims any and all liabi lity, including without limitation consequent ial or incidental damages. typical paramet ers can and do vary in different applications. all operating parameters must be validated for each customer application by customer?s technica l experts. measurement specialties, inc. does not convey any license under its patent rights nor the rights of others. free datasheet http://www.datasheet-pdf.com/
|
